
Kitchens, baths, and full-home renovations done code-correct
Home remodeling contractor Murphy TX built for real Texas homes
SpanForge Pro is the home remodeling contractor Murphy TX homeowners call when a kitchen, bathroom, or whole-house renovation has to be done right the first time. We handle permits, framing, drywall, tile, cabinets, and finish work with our own crews. If you have been searching for a home remodeler Murphy TX who shows up on schedule and keeps the job site clean, call (855) 948-0345 today.
What's included
What our remodeling service includes
Every SpanForge Pro remodel starts with a written scope and a fixed price. Here is what is covered on a standard Murphy project, and what we handle as an add-on when your house needs it.
Permits and inspections
We pull all Collin County permits and meet the inspector on site for framing, electrical, and plumbing rough-ins. You get copies of every signed inspection card. No permit shortcuts, ever.
Demo and debris hauling
Tear-out, floor protection, dust barriers, and daily debris removal are included. We do not leave a dumpster in your driveway for a month or let demo dust settle into your HVAC system.
Framing and structural work
Wall removal, beam installation, and structural repairs are handled by our framing crew. We check for foundation cracks and structural rot before we close any wall, so hidden problems get fixed while they are still accessible.
Electrical and plumbing rough-in
New circuits, outlets, lighting, supply lines, and drain work are installed by licensed trades and inspected before drywall. We replace outdated electrical wiring and fix plumbing leaks while the walls are open.
Finishes and fixtures
Drywall, paint, tile, cabinets, countertops, and trim are all part of the standard scope. We use Sherwin-Williams and Behr paint, and set tile on cement board with proper waterproofing behind every wet area.
Final walkthrough and warranty
We test every outlet, faucet, and drawer with you before final payment. You get a punch list closed out within 5 business days and a one-year workmanship warranty on our labor.
Service overview
What a home remodeling contractor Murphy TX actually does
A home remodeling contractor Murphy TX is a licensed general contractor who manages the trades, permits, materials, and inspections for residential renovation work. That covers tearing out a dated kitchen, rebuilding a bathroom, finishing a basement, or reworking a floor plan. We pull the Collin County permits, coordinate framing and drywall, run new electrical and plumbing, and finish with tile, countertops, cabinets, and paint. One crew, one schedule, one point of contact from demo day to final walkthrough.
Murphy homes sit on expansive clay soil, and that matters more than most homeowners realize. Foundation cracks show up in slab corners, water damage hides behind shower walls, and outdated electrical wiring in older builds fails inspection. We see roof leaks and poor insulation in houses near Maxwell Creek and Timber Ridge after every hard spring storm. A residential remodeling contractor Murphy TX who knows this ground and these codes saves you from repairs that come back two years later.
The service timeline
How our remodeling process runs
The process flexes to the condition, but these checkpoints keep decisions clear.
On-site walkthrough
We come to your house, measure the space, and look at what is behind the walls. That means checking for foundation cracks, water damage, mold growth, and outdated electrical wiring. You get a written scope and a fixed price within 48 hours. No charge for the visit.
Design and permits
We finalize layout, materials, and finishes with you, then pull the Collin County permits. Cabinet and countertop lead times run 3 to 5 weeks right now, so we order early. You approve samples of tile, paint, and countertop before anything is installed.
Demo and rough-in
Demo takes 2 to 4 days for a kitchen or bath. We protect floors, set dust barriers, and haul debris daily. Then framing, electrical, and plumbing rough-in go in, followed by the city inspection. This is where hidden problems surface, and we handle them before walls close.
Install and finish
Drywall, tile, cabinets, countertops, and paint go in over the next 2 to 3 weeks. Our crews use a laser level for cabinet runs and a stud finder before every anchor point. You see progress daily, and we walk the job with you at the end of each phase.
Final walkthrough
We test every outlet, every faucet, and every drawer. You get a punch list, and we close it out within 5 business days. Final payment is due only after you sign off on the completed work. Our workmanship warranty covers labor for one full year.
Tools & methods
Tools and methods we use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
DeWalt and Milwaukee cordless drills
Daily drivers for framing, cabinet install, and fixture mounting. We run Milwaukee and DeWalt because they survive Texas heat and job-site abuse better than anything else.
Makita circular saw
Cutting lumber, plywood, and trim on site. A sharp blade and a straight edge make the difference between a clean cut and a gap you have to caulk.
Laser level
Cabinet runs, tile layout, and countertop alignment. A laser level catches a 1/8-inch sag that your eye will not, and that sag is what makes cabinet doors rub.
Stud finder and tape measure
Locating framing before every anchor, TV mount, and cabinet screw. Hitting a stud the first time keeps your walls intact and your installs solid.
Nail gun and sledgehammer
Framing, sheathing, and demo. The nail gun speeds up rough framing; the sledgehammer handles tear-out when a wall has to come down.
Concrete mixer
Small slab patches, shower pan bases, and footing repairs. Mixing on site gives us control over the ratio and the cure time.
Use cases
When Murphy homeowners call us
These examples show how the service framework adapts rather than forcing every call through one repair.

Master bath with hidden water damage
The shower had been leaking behind the wall for years. Tile was loose, the framing behind it was rotted, and mold growth had spread into the adjacent closet. The homeowner only noticed because of a musty smell and a soft spot in the floor. → We removed the rotted framing, treated the mold, rebuilt the shower with cement board and a waterproofing membrane, and installed new tile, a frameless glass door, a double vanity, and new lighting. The bathroom was finished in 3 weeks with a flood-tested pan.
Whole-home update before listing
A 2001 Murphy house with original carpet, builder-grade paint, dated light fixtures, and two bathrooms with failing faucets and loose toilets. The seller needed it market-ready in under 12 weeks. → We replaced flooring throughout, repainted every room, updated all light fixtures and outlets, rebuilt both bathrooms with new tile and fixtures, and fixed two plumbing leaks found during demo. The house listed on schedule and passed buyer inspection with zero repair requests.
Problems we solve
Remodeling problems we fix in Murphy
Murphy homes deal with clay soil, humid summers, and aging systems. These are the problems we see most often when we open up walls on a remodel.
Water damage behind shower and tub walls
We open the wall, replace rotted framing, install new cement board and waterproofing membrane, and pressure-test the plumbing before tile goes back on. Every wet area gets a flood test before we close it up.
Outdated electrical wiring failing inspection
We run new circuits, install GFCI outlets, upgrade the panel if needed, and have the work inspected. Your remodel passes code and your insurance stays valid. We handle the electrical scope with our own licensed electricians.
Foundation cracks showing up in slab corners
We assess the crack pattern before we start finish work. If the movement is active, we bring in a foundation specialist first. If it is stable, we use flexible sealants and floating finishes that tolerate minor movement without cracking.
Poor insulation and roof leaks after storms
We inspect the roof and attic during the walkthrough. If we find active leaks or saturated insulation, we fix the source before interior work starts. Otherwise your new drywall and paint will fail within a season.
Pricing process
What remodeling costs in Murphy
$18,000 - $120,000+ depending on scope and finishes
Scope and square footage
A hall bath costs far less than a primary bath with a walk-in shower and double vanity. Kitchen size and whether walls come down drive the framing and drywall cost. Bigger scope means more labor hours and more material.
Material grade
Stock cabinets and laminate counters sit at the low end. Custom cabinetry, quartz or stone countertops, and large-format tile push the number up fast. We price both tiers so you can see the difference before you choose.
Hidden damage
Water damage, mold growth, structural rot, and outdated electrical wiring are not visible until demo. When we find them, we stop, show you, and price the fix before we touch it. No surprise invoices.
What does a home remodeling contractor do in Murphy TX?
A home remodeling contractor in Murphy TX manages the entire renovation: permits, demolition, framing, electrical, plumbing, drywall, tile, cabinets, countertops, and paint. We coordinate every trade, meet the inspector, and hand you a finished space. You get one contract, one schedule, and one crew responsible for the outcome instead of juggling five separate subcontractors.
How much does a home remodeling contractor cost in Murphy?
Typical 2026 pricing in Murphy runs $18,000 to $45,000 for a bathroom remodel and $35,000 to $90,000 for a kitchen, depending on size and finishes. Full-home renovations start around $120,000. Labor is roughly 30 to 40 percent of the total. We give you a fixed written price after the on-site walkthrough, so you know the number before demo starts.
How to hire a home remodeler in Murphy TX?
Verify the Texas general contractor license, ask for a certificate of insurance, and confirm they pull permits in Collin County. Get three local references from Murphy jobs finished in the last year. Then compare scope, not just price. A cheap bid that skips permits or uses unlicensed subs will cost you more when you sell the house.
Do I need a home remodeling contractor for my Murphy house?
If the work touches electrical, plumbing, structural framing, or requires a permit, yes. Texas law and Collin County code require a licensed contractor for those scopes. Cosmetic work like paint and flooring you can do yourself. Anything behind the walls, or anything that changes the footprint of the house, needs a licensed home remodeling contractor Murphy TX.
Ready when you are
Get your Murphy remodel priced today
Call (855) 948-0345 and we will schedule a no-charge on-site walkthrough. You get a written scope, a fixed price, and a start date within 48 hours. Licensed, insured, and warrantied. Serving Murphy, TX and all of Collin County.

Talk with the local team
Request home remodeling contractor
Call (855) 948-0345 or email [email protected] and we will get back to you the same business day. We schedule walkthroughs Monday through Friday and answer emergency calls 24/7 for storm and water damage. Tell us what you are planning and we will tell you what it takes to get it done.


